manualshive.com logo in svg

LXE MX3X, Reference Manual

Share
Download
LXE MX3X Reference Manual Download Page 46

36 

Power Modes 

MX3X Reference Guide 

 

E-EQ-MX3XRG-A 

Critical Suspend Mode 

The purpose of the Critical Suspend mode is to reduce power consumption of the MX3X to a low 
level that still retains the contents of SDRAM. The unit enters Critical Suspend Mode only when 
the Main Battery  has failed or is hot-swapped. The Backup Battery is supplying power to the unit 
during Critical Suspend Mode.  

When hot-swapping (the Main Battery is removed), the display turns off, the BATT M LED 
begins to flash red, all peripherals are shut down, the CPU clock is stopped, and power is removed 
from the PCMCIA card. 

When the MX3X is in the Critical Suspend state (the Main Battery is in place and the unit is being 
powered by the Backup Battery), the display turns off, the BATT M LED begins to flash red, all 
peripherals are shut down, the CPU clock is stopped, and power is removed from the PCMCIA 
card. The MX3X is saving the state prior to the Main Battery failing and cannot be used.  

If a new fully charged main battery is installed before the Backup Battery is depleted 
(approximately 5 minutes) the MX3X transitions to the Suspend state. To resume operation tap 
the Power key.  

If the Backup Battery is depleted before a fully charged Main Battery is inserted, the MX3X 
immediately turns itself Off and all unsaved information is lost. Insert a fully charged Main 
Battery and press the Power button to turn the MX3X On. 

Off Mode 

The unit is in Off Mode when the Main Battery and the Backup Battery are depleted.  

Insert a fully charged Main Battery and press the Power button to turn the MX3X On. 

 

Summary of Contents for MX3X























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands