LXE MX3X Reference Manual Download Page 94

Page: 94 / 150

Control Panel Options

MX3X Reference Guide

E-EQ-MX3XRG-A

PCMCIA

Access:

Start | Settings | Control Panel | PCMCIA

Note:

Radio card in Slot 0, Internal ATA in Slot 2.

Factory Default Settings

Slot 0

PCMCIA

Disable slot now

Off

Power slot during sleep (3.3v) Off
Power slot during sleep (5v)

Off

Write protect slot

Off

Slot 1

Compact
Flash

Disable slot now

Off

Power slot during sleep (3.3v) Off
Power slot during sleep (5v)

Off

Write protect slot

Off

Slot 2

ATA Card

Disable slot now

Off

Power slot during sleep (3.3v) Off
Power slot during sleep (5v)

Off

Write protect slot

Off

The name of the card (from the CIS data on the card) in the slot is displayed. This information
cannot be changed by the user.

When “Power slot during sleep” is checked, the slot will stay powered up in Suspend at the cost
of reduced battery life.

When “Disable slot now” is checked, the slot is powered down as soon as the Control Panel is
closed and the PCMCIA driver ignores any card in the slot.

Summary of Contents for MX3X






















































































































































Search results

Summary of Contents for MX3X

Reviews:

Brands by name

Popular brands

LXE MX3X, Reference Manual

Search results

Summary of Contents for MX3X

Reviews:

Brands by name

Popular brands