LXE MX3X Reference Manual Download Page 115

Page: 115 / 150

E-EQ-MX3XRG-A

MX3X Reference Guide

Appendix A Key Maps

Keypad

Note: The key mapping in this appendix relates to the physical keypad on the MX3X. See section titled

“Input Panel” for the Virtual (or Soft) Keypad used with the stylus.

Key Map 101-Key Equivalencies

Note:

This key mapping is used on hand held computers that are NOT running an LXE Terminal Emulator.

When using a sequence of keys that includes the 2

key, press the 2

key first then the rest of the key sequence.

Note: When the computer boots, the default condition of NumLock is On and the default condition of Caps (or

CapsLock) is Off. The Caps (or CapsLock) condition can be toggled with a 2

+F1 key sequence. The

CAPS LED is illuminated when CapsLock is On.

Press These Keys and Then

To get this key

Shift Ctrl Alt CapsLock

Press this key

Contrast x

Volume x

Backlight x

F10

Shift

Shft

Alt

Ctrl

Scan

Esc

Space

Spc

Enter

CapsLock (Toggle)

Back Space

BkSp

Tab

Left Scan key default value is Scan. Right Scan key default value is Enter.

Summary of Contents for MX3X






















































































































































Search results

Summary of Contents for MX3X

Reviews:

Brands by name

Popular brands

LXE MX3X, Reference Manual

Search results

Summary of Contents for MX3X

Reviews:

Brands by name

Popular brands