manualshive.com logo in svg

LXE MX3X, Reference Manual

Share
Download
LXE MX3X Reference Manual Download Page 11

 

E-EQ-MX3XRG-A 

 

MX3X Reference Guide 

 

Chapter 1  Introduction 

Overview 

The MX3X is a rugged, portable, hand-held Microsoft® Windows® CE .NET equipped computer 
capable of wireless data communications. The MX3X can transmit information using a 2.4 GHz 
radio (with an internally mounted antenna) and it can store information for later transmission 
through an RS-232, InfraRed, or USB port.  

The MX3X is horizontally oriented and features backlighting for the display. The touch-screen 
display supports graphic features and Windows icons that the Windows CE .NET operating 
system supports. The keys on the keypad are constructed of a phosphorescent material that can 
easily be seen in dimly lighted areas. 

This device is a Windows CE compatible computer that can be scaled from a limited function 
batch computer to an integrated RF scanning computer.  

The stylus in the Stylus Kit (shipped with unit) is used to assist in entering data and configuring 
the unit. Protective film for the touch screen is available as an accessory. 

 

 

Note:  Until the Main Battery and Backup Battery are completely depleted, the MX3X is 

always

 

drawing power from the batteries (

On

). 

Related Manuals 

The “MX3X User's Guide” contains MX3X installation, user instruction and safety statements. 

Please refer to the "MX3 Cradle Reference Guide" for technical information relating to the 
MX3X-compatible Desk Top and Vehicle Mount cradles.

 

If you need to set up the integrated SE923 scanner 

barcode reading parameters

, please refer to 

the “

Integrated Scanner Programming Guide

” on the LXE Manuals CD or the LXE website 

www.lxe.com. 

 

Summary of Contents for MX3X























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands