Lupus Electronics LUPUSEC-XT2, Manual

Page: 13 / 148

13
ENGLISH
Access to the main interface of the LUPUSEC-XT2
The control unit administration is controlled via a browser-based user interface, which
is built like a web page. On these web page, you can control all system functions of
the XT2, add and edit sensors, arm or disarm the control unit, check for open
windows or doors, and view pictures from your LUPUSNET HD network camera and
recorder (if installed and connected).
To open the main menu of the control unit, proceed as follows:
1.
Start the link “LUPUSEC-XT2 network finder” from the CD (or enter the IP address
of the XT2 - if already known - in your browser).
2.
Click on “Search”. The control unit should be found. Select the XT2 from the list
with the left mouse button.
3.
Click on “Configure Setting”, if you want to change the IP settings of the control
unit. If your network includes a DHCP server, this should not be required.
Otherwise, e.g. in case of a direct connection via a crossover cable or no
router/DHCP server available, you need to assign an IP address to the control unit
manually, which is in the same network as your access device (PC, notebook…).
4.
Double-click on the found control unit or alternatively on “Open Web Page”. Your
standard browser opens and the connection to the XT2 is established.