Lupus Electronics LUPUSEC-XT2, Manual

Page: 56 / 148

56
ENGLISH
Report
In this menu, you can define whether the control unit shall notify you in case of
alarms, status changes or all events. You can either send text message reports via
GSM / internet or by phone (via SIM card).
You can also choose several methods in parallel to reduce the risk of failures.
You can specify altogether 20 recipients. To use this function, you need to open an
account at Smstrade for the delivery via the
internet or install a SIM card without
SIM lock (PIN query deactivated) and with sufficient credit for the delivery via the
GSM module. For further information, refer to chapter „Network  GSM & SMS“.

Telephone number
Enter a valid telephone number to call by text message/phone. If this is the number
of a security firm, enter your account number before that (e.g. 1234@0177123456).

Options
o
“via GSM” (SIM card)

Text alarm via GSM module
o
“via Internet” (LAN connection)  Text alarm via smstrade.de
o
“Phone call” (SIM card)  Phone call via GSM module

Text format
Tick “Text format”, if an actual text message is to be sent to the recipient (e.g. area 1,
zone 12, kitchen door: burglary). If the option is not ticked, the message is sent in
contact ID format. (e.g. 1234 18143154611). For further information on the contact ID
format, please refer to the end of this manual.
Note:
If the Phone call option is active, you do not need to activate Text format.

Condition
You can choose from a drop-down menu, whether the XT2 is to send text messages
in case of status events, alarm events or all events. Additionally, you can further
specify these events in the drop-down menu to the right. This menu applies filters;
the unticked events are not reported by text message.