Lupus Electronics LUPUSEC-XT2, Manual

Page: 66 / 148

66
ENGLISH
You get this gateway IP address through Windows Clients by clicking on Start and
then entering “
CMD ” in the “Execute” or “Search” text box (alternatively Windows key
+ R). A panel opens, in which you enter “ ipconfig “. The result is the overview of your
network adapters, the associated IP addresses, and the standard gateway.
Search the configuration menu in the router, which is usually located in the network
settings, to create a port forwarding (NAT). For a port forwarding, the (local) IP or the
name of the security firm control centre, the external port (in our example: 8080) and
the internal port 80 (not editable) of the control unit room must be entered.
In case of a Fritz-Box, the menu is located at “Internet”
 “Clearance”.
If you executed both entries – DDNS and port forwarding – correctly, you should now
be able to access the XT2 from the outside (internet) using your DDNS address in a
web browser.
A browser entry may look as follows:
http://mydyndnsname.homeip.de:externalportnumber
or: http://mueller.lupus-ddns.org:8080
Note:

To access the control unit via the internet, it is required that your ISP (Internet
Service Provider) supplies you with a unique IP address. Access / port forwarding
via cells / AP (UMTS / LTE etc.) may not be possible and should be clarified with
the ISP beforehand.

If you have any questions or problems, please do not hesitate to contact our
support service at any time (+49 (0) 63 41 - 93 55 30).