Lupus Electronics LUPUSEC-XT2, Manual

Page: 27 / 148

27
ENGLISH
Edit sensor
You can assign different properties and actions to most of the sensors. In case of an
alarm, they react in entirely different ways. Access the settings of a sensor via the
following items: “List”

“Sensor list”, then click on “Edit” to the right of the sensor.
Depending on the type of sensor, the following settings are available:
ID
Shows the sensor-specific ID (cannot be changed).
Version
Shows the software version (only for certain devices)
Name
Assign an individual name of up to 30 characters to the sensor.
Area
Assign an area to the sensor. The areas can be armed separately.
Zone
Assign a zone number to the sensor. Do not duplicate zone numbers. Each area has
maximally 80 zones.