Lupus Electronics LUPUSEC-XT2, Manual

Page: 53 / 148

53
ENGLISH
Note :
If the alarm duration of an external siren is set shorter with the DIP switches
(SW3+4), as described in this section, then the audio alarm of the external siren will
end early. Vice versa, the alarm duration of an external siren will end early with the
maximum alarm duration as described, if the DIP switches (SW3+4) are set to a
longer alarm duration. If the alarm duration is “disabled”,
all integrated sirens remain
off.
Sound settings
These settings concern the internal siren of the control unit and additionally
integrated external siren(s). However, you can change only the volume of the internal
siren, external sirens can be switched on or off only (their volume remains constant).
It is impossible to configure external and internal sirens separately.

Ring tone for entrance area
Enter the volume of the doorbell.

During delay upon entry (Arm mode)
Enter the volume to signal the delay upon entry.

During delay upon exit (Arm mode)
Enter the volume to signal the delay upon exit.

During delay upon entry (Home mode)
Enter the volume to signal the delay upon entry.

During delay upon exit (Home mode)
Enter the volume to signal the delay upon exit.

Audio warning at the end of the delay
Enter, how many seconds you want to hear the sound before the end of the
previously defined delays (see above).
Example:
If you entered 5 seconds, a warning sound (countdown) will start to sound for the last
5 seconds only before the end of the delay. If you activate
Continuous , the warning
sound will sound for the entire duration of the delay.

Alarm while disarmed
This option is “On” by default. If this setting is active, then the internal siren of the
control unit and additionally integrated siren trigger an acoustic alarm, even though
the control unit is disarmed. This includes every alarm that is not silent, e.g. panic
alarm or 24 h smoke alarm. You can see which sensors are set to
24 h via Sensors
 List  Alarm overview. If you want to be informed only by e-mail, text message,
contact ID, but not in an acoustic way, set the option to “Off”.