Lupus Electronics LUPUSEC-XT2, Manual

Page: 43 / 148

43
ENGLISH
31 Message type incorrect Delete message type or use one of the
following values: flash, unicode, binary,
voice.
40 SMS route incorrect Available routes: basic, gold, direct
50 Identification failed Check Gateway Key
60 Insufficient credit Charge credit
70 Network not covered Choose different route
71 Feature impossible Choose different route
80 Delivery to SMS-C failed Choose different route or contact
support
100 Text received and sent
TEST TEXT
This test applies exclusively to sending text messages via smstrade.de.

Recipient:
Enter your mobile number to which you want to send a test text message (via
smstrade.de).

Text:
Optionally enter the text of the test message.
SIM card settings (SMS via GSM)
With the XT2, you can also send short messages via the mobile network (GSM).
Before you insert a (mini) SIM card on the back of the XT2 control unit, you need to
disable the PIN code query with a mobile phone. Then configure the recipient and
events (when to send text alerts) via Setting  Text report  Text notification (see
chapter “Report”).
Note:

Currently (end of 2014), the advanced “SIM card settings” are not supported, and
you can ignore the sub-menus GSM, GPRS, MMS, and SMS.

It is important though to set “Report status of SIM card” to “Yes”, as otherwise it is
not possible to send texts via GSM!

If the XT2 control unit does not recognize the SIM card anymore, e.g. when
checking for card credit, disconnect the power supply (including the emergency
battery) and restart the control unit.

To send a test message via SIM card module, go to “Send text…”. A window
opens, in which you enter the telephone number and an optional text of the test
message as described above E (see “TEST TEXT”).