Luma Recorders
|
Local Interface
Record Tab
This gives data on the status of the system’s recording activity. This
is not updated continuously, the data is gathered at the moment you
enter the System Info window and does not update until after you
leave the window. The data include:
}
Camera No.
}
Recording Status
}
Stream Type
}
Frame Rate
}
Bitrate (Kbps)
}
Resolution
}
Record Type
}
Encoding Parameters
}
Redundant Record
Click
Back
to return to the settings menu, or
Live View
to return to
the live page.
Alarm Tab
This option is not available on 4-channel DVR models.
This lists all potential alarm connections, both input and output.
This list is informational only; it cannot be edited. For each
connection it lists the following data:
}
Number
}
Alarm Name
}
Alarm Type
}
Alarm Status
}
Triggered Cameras
Network Tab
This shows the vital data of the network to which your recorder
is attached. This table is for information only; you cannot edit the
details here.
}
IPv4 Address
}
IPv4 Subnet Mask
Summary of Contents for LUM-500-DVR-16CH
