Luma Surveillance LUM-500-DVR-16CH, Technical Reference Manual

Page: 158 / 217

Luma Recorders
|
Local Interface
Jump to Main TOC 158 Jump to Local Interface
mode at the top, then click Apply . The system reboots to initialize
the new mode.
Quota Mode
Quota mode gives each camera its own allocated capacity, as shown.
Cameras that use space in excess of that use the free quota space.
Choose the camera’s channel number from the dropdown, assign its
maximum recording capacity, and click
Apply . Once you’ve done
that, you can click Copy to assign that setting to other cameras.
Used Record Capacity shows the amount of space that camera has
recorded thus far. This is informative; it cannot be edited.
Used Picture Capacity (NVR only) shows the amount of space that
camera has filled thus far. This is informative; it cannot be edited.
HDD Capacity gives the total free capacity of the drive. This is
informative; it cannot be edited.
Max. Record Capacity is the amount of space you set aside as this
camera’s quota for recordings. No other camera can overwrite this
data.
Max. Picture Capacity (NVR only) is the amount of space you
set aside as this camera’s quota for pictures. No other camera can
overwrite this data.
Free Quota Space is the remaining space on the drive, after
subtracting out all the cameras’ quotas (but not subtracting space
used by overflow). This is informative; it cannot be edited.
Enable HDD Sleeping saves on power usage when nothing is being
recorded. The hard drive stops spinning when it is not in use.
Internal buffers should prevent any loss of data while the hard drive
spins up again to continue recording.
Click Copy to duplicate the current camera’s quota setting to other
cameras.
Click Back to return to the settings menu, or Live View to return to
the live page.
Group Mode
Group mode is similar, but assigns groups of cameras to record on a
specific hard drive designated for that group. You can have as many
camera groups as you have hard drive groups. To assign a hard drive