Luma Surveillance LUM-500-DVR-16CH, Technical Reference Manual

Page: 64 / 217

Luma Recorders
|
Live View Screen
Jump to Main TOC 64 Jump to Live View Screen
Help
This opens a pop-up window that shows an overlay of the live page,
with labels identifying the major control groups. To close the pop-up
window,
}
in the web interface, click the X at the top right corner.
}
in the local interface, right-click the mouse.
Settings
This takes you to the main tools page, from which you can adjust
your system’s settings or perform a variety of specialized commands.
For an explanation of the items within this selection,
}
see “Web Interface” on page 89, or
}
see “Local Interface” on page 150.
Sequence Mode
This mode rotates between grid views when in live view. It is
disabled when you are in playback mode.
When sequence mode is on in a single-channel view, it rotates from
that camera to the next, in order. If your recorder is in grid mode,
it rotates to the next grid, starting with the first channel not shown
(e.g., if a grid of channels 1–4 is showing, the next page will be a
grid of channels 5–8). Leftover space on the last grid page is filled in
with blank panels as necessary.
}
In the web interface, when you click Sequence , a pop-
up dialog opens in front of the playback controls. In this
dialog, choose the view mode you prefer and set the dwell
time, which is the number of seconds the system waits before
switching to the next view. Your display remains in sequence
mode until you stop it by double-clicking the channel,
clicking
Sequence again and choosing a dwell time of no
switch, or clicking the Settings icon.
}
With the local interface, you must set a default dwell time
before you can use sequence mode. To do so, click the
Settings icon. Go to Configuration , then choose Live View
at the upper left. Choose your dwell time to the right, or
choose not to switch (which disables sequence mode). Click
Apply , then click Live View in the lower left to return to the