Luma Recorders
|
FAQ
Jump to Main TOC
44
Jump to FAQ
Installation
Can I set up a camera without being at the recorder?
Yes, with the Wirepath Surveillance CCTV tester (http://www.
SnapAV.com/p-1075-wps-cctv-tester.aspx) you can connect to a
camera at the actual installation location for setup and calibration.
The tester plugs into a port in the camera housing and displays the
camera’s field of vision on a small screen for your convenience.
Can I set up a recorder without a monitor or PC?
recorder for initial setup using the local interface. However, we
recommend that you use the web interface for easier installation.
Can I shut my recorder down by cutting the power?
You can do so, but you should not do this regularly. Follow the
proper shutdown procedure to ensure product life.
For security reasons, you can only shut down the recorder through
the local interface. From the live page, go to
Settings > Shutdown
,
then click
Shutdown
.
If you are working remotely, you can reboot the recorder by going to
Configure the Recorder > Maintenance
, and clicking
Reboot
at the
top of the page.
Summary of Contents for LUM-500-DVR-16CH
