Luma Surveillance LUM-500-DVR-16CH, Technical Reference Manual

Page: 121 / 217

Luma Recorders
|
Web Interface
Jump to Main TOC 121 Jump to Web Interface
Management Port shows the port for that individual camera. For
Luma IP cvameras, this is the server port.
Channel No. shows which internal channel the camera is using.
This will usually be 1, but can be changed on a camera with a multi-
channel encoder.
User Name , Password , and Confirm are all used for logging into the
camera itself.
Transfer Protocol allows you to set the protocol to TCP, UDP, or
Auto, which lets the system decide which is best.
When finished, click Save to keep your changes, or Back to discard
them.
Quick Add
Clicking Quick Add searches your local network for cameras and
lists them all by IP address. One at a time, select the camera you
wish to add by clicking on its radio button, clicking
OK , selecting its
channel, and then clicking OK again.
You can press Cancel to leave without saving the changes you’ve
made.
POE Password
This button lets you reset all plug-and-play IP cameras (those
cameras connected to the POE ports on the rear of the NVR) to the
same password. This allows easy password maintenance while
maintaining plug-and-play functionality. Use the dialog to enter
your new desired password
Press OK to save and close the dialog, or Cancel to leave without
saving changes.