Luma Surveillance LUM-500-DVR-16CH, Technical Reference Manual

Page: 198 / 217

Luma Recorders
|
Local Interface
Jump to Main TOC 198 Jump to Local Interface
Click Back to return to the settings menu, or Live View to return to
the live page.
FTP Tab
Use this option to upgrade by retrieving the new firmware over your
network.
Enter the FTP server address in the area provided, then press Enter
at the bottom of the virtual keypad.
Click on the appropriate firmware file, then click Upgrade to begin.
The system reboots when it is completed.
Click Back to return to the settings menu, or Live View to return to
the live page.
Default
This is used to restores your recorder to its default settings, but
maintains the current firmware version.
Press Restore Default Settings to return the recorder to its factory
default settings, but preserves network settings. There is no chance
to undo.
Press Restore Factory Settings to return the recorder to its factory
default settings, removing all customization. It also sets the recorder
to DHCP. There is no chance to undo.
Press Restore to Inactive to erase the user credentials on the
recorder (including the admin account’s password, so you’ll have to
create a new one). Note that this does not remove any recordings or
snapshots from your hard drives.
Click Back to return to the settings menu, or Live View to return to
the live page.
Net Detect
These windows provide data and testing for the recorder’s network.
Traffic Tab
This window is provided for information only. At the top is a chart
graphing data transfer activity between your recorder and your
network. This chart only runs while this menu item is selected.
Below that is a chart of network devices showing the following data.