Lucent Technologies PacketStar PSAX 4500, User Manual

Page: 563 / 722

255-700-239 A-107
PacketStar
®
PSAX 4500 Multiservice Media Gateway User Guide , Issue 2 Release 8.0.0
Appendix A SNMP Trap Messages
Definitions of MIB Objects Used for Trap Messages
oamTestFailureReason Code
An identified reason why an OAM Loopback Test request has failed. Valid range is a number
between 1 and 7.
See Table A-49 for a mapping between numbers and their enumerated type.
86 segPMBRActDeniedTowardsNearEnd The segment performance monitoring/backward
reporting activation request sent toward the near-
end is denied.
87 segPMBRActDeniedTowardsBothEnd The segment performance monitoring/backward
reporting activation request sent toward both
ends is denied.
88 segPMBRActFailedTowardsFarEnd The segment performance monitoring/backward
reporting activation request sent toward the far-
end failed.
89 segPMBRActFailedTowardsNearEnd The segment performance monitoring/backward
reporting activation request sent toward the near-
end failed.
90 segPMBRActFailedTowardsBothEnd The segment performance monitoring/backward
reporting activation request sent toward both
ends failed.
91 segPMBRDeactSuccTowardsFarEnd The segment performance monitoring/backward
reporting deactivation request was successfully
sent toward the far-end.
92 segPMBRDeactSuccTowardsNearEnd The segment performance monitoring/backward
reporting deactivation request was successfully
sent toward the near-end.
93 segPMBRDeactSuccTowardsBothEnd The segment performance monitoring/backward
reporting deactivation request was successfully
sent toward both ends.
94 eteSendPMCell End-to-end management cell has been sent out to
IO module indicating PM cell needs to be sent.
95 eteReceiveBRErrMessage A BR message has been forwarded to the CPU
indicating a BR error.
96 receiveBRErrMessage A backward reporting message has been for-
warded to the CPU indicating BR error.
97 receiveFPMErrMessage A FPM message has been forwarded to the CPU
indicating a FPM error
98 sendPMCell A management cell has been sent out to the IO
module indicating the PM cell needs to be sent.
Table A-48. OAM Activation Deactivation Result Codes (Continued)
Number
Value
Enumerated Type Description