Lucent Technologies PacketStar PSAX 4500 User Manual Download Page 666

Page: 666 / 722

Appendix D Reference Information

Quality of Service (QOS) Class Tables

D-34

255-700-239

PacketStar

PSAX 4500 Multiservice Media Gateway User Guide

, Issue 2

Release 8.0.0

The Alarm Status field on the Equipment Configuration window displays the
current status of all

PacketStar

I/O, server, and common equipment modules

in the PSAX system. The alarm status descriptions are provided in Table D-2.

Quality of Service (QOS) Class Tables

Table D-4 details the PSAX system support of defined ATM QoS classes.

Table D-2. Alarm Status Descriptions for PSAX Modules

Numb

Alarm Status

Module Type

Affected

Description

NoAlarm/Card-
Present

I/O

No module is inserted in the
chassis.

WrongCardType I/O

One type of module was config-
ured in this slot in the chassis,
but a different module now
occupies this slot.

LineFailed

All

The line has failed.

CardRemoved

All

A module has been configured
and then removed.

ReferenceClock-
Failed

Stratum

The timing reference clock has
failed.

CompositeClock-
Failed

Stratum

The timing composite clock has
failed.

Overload

Power Supply

The Power Supply is operating
under an overload condition.

Plus5vFailed

Power Supply

The 5 V Power Supply has
failed.

Plus120vFailed

Power Supply

The 120 V ac Power Supply has
failed.

Minus48vFailed

Power Supply

The -48 V dc Power Supply has
failed.

UnknownAlarm

I/O

The reason for failure is not
known.

CompleteClock-
Failed

Stratum

The timing complete clock has
failed.

BackplaneCir-
cuitryFailed

All

The chassis backplane circuit
board is not operating.

PowerFailed

Power Supply

Power failed

Summary of Contents for PacketStar PSAX 4500

















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PacketStar PSAX 4500

Reviews:

Related manuals for PacketStar PSAX 4500

Brands by name

Popular brands

Lucent Technologies PacketStar PSAX 4500, User Manual

Search results

Summary of Contents for PacketStar PSAX 4500

Reviews:

Related manuals for PacketStar PSAX 4500

Brands by name

Popular brands