Chapter 6 Configuring PNNI
PNNI System-Wide Configuration
6-48
255-700-239
PacketStar
®
PSAX 4500 Multiservice Media Gateway User Guide
, Issue 2
Release 8.0.0
Viewing PNNI Map Node Information
Begin
1
On the Console Interface Main Menu window, select the
Site-Specific
Configuration
option.
The Site-Specific Menu window is displayed.
2
Select the PNNI System-Wide Configuration option and press Enter (or
press Ctrl+N).
The PNNI System-Wide Configuration window is displayed.
3
Select the
PNNI Map Node Information
command.
The PNNI Map Node Table window is displayed (see Figure 6-20).
4
Select an entry on the table and press Enter.
The PNNI Map Node Information window is displayed.
The descriptions of the display-only fields on this window are provided in
Table 6-16.
End
The PNNI Map Node Table contains a list of nodes as seen from the per-
spective of a local node, and all information learned by the local node
from nodal information PNNI topology state elements (PTSEs). This table
is read-only, because the map is generated dynamically during operation
of the PNNI protocol, not manually configured.
Figure 6-20. PNNI Map Node Table Window
