255-700-239
6-65
PacketStar
®
PSAX 4500 Multiservice Media Gateway User Guide
, Issue 2
Release 8.0.0
Chapter 6 Configuring PNNI
PNNI System-Wide Configuration
Viewing the PNNI Neighbor Peer Table
The PNNI Neighbor Peer Table window contains all the attributes necessary
to describe the relationship a node in the PSAX system has with a neighbor-
ing node within the same peer group. The PNNI Neighbor Peer Table window
is read-only because neighboring peers are generated dynamically by the
PNNI protocol, not manually configured. For more information, see the ATM
Forum Specification,
Private Network-Network Interface (PNNI 1.0) Specification
Version 1.0, af-pnni-0055.000
, Sections 5.7 and 5.8.
To view PNNI neighbor peers, perform the steps in the following procedure.
Begin
1
On the Console Interface Main Menu window, select the Site-Specific
Configuration option.
The Site-Specific Menu window is displayed.
2
Select the PNNI System-Wide Configuration option.
The PNNI System-Wide Configuration window is displayed.
3
Select the
PNNI Neighbor Peer Information
command and press
Enter.
The PNNI Neighbor Peer Table window is displayed (see Figure 6-28).
4
If a node has been created, select the node for which you want to view
information and press Enter.
The PNNI Neighbor Peer Information window is displayed (see
Figure 6-29). The values for the fields in this window are described in
Table 6-22.
5
To return to the Link Table window, select the
Go Back to Previous
Screen
command.
The Neighbor Peer Table is displayed (see Figure 6-28).
End