255-700-239
7-5
PacketStar
®
PSAX 4500 Multiservice Media Gateway User Guide
, Issue 2
Release 8.0.0
Chapter 7 Configuring ATM Trunking
Overview of This Chapter
Configuring a Remote IWF Node
Begin
1
On the ATM Trunking Local Node Configuration window, select the
Go
to Remote IWF Table
command.
2
The ATM Trunking Remote IWF Table window is displayed (see
Figure 7-3).Select the
Add Remote IWF Entry
command.
The ATM Trunking Remote IWF Configuration window (see Figure 7-4)
is displayed.
3
Enter values for the fields on this window according to the information
provided in Table 7-2.
4
Select the
Add Configuration
command.
The following message in displayed in the status line of the window:
This configuration is added.
Note that the following commands are now displayed in the window:
Go
to Bearer VCC Table
,
Go to Data Channel Table
.
5
Select the
Bring Admin Status Up
command to bring the administra-
tive status of the remote IWF you just added into service.
6
To return to the ATM Trunking Remote IWF Table window to add addi-
tional signaling VCC IDs, press Ctrl+B.
7
Repeat Steps 2–5 to add additional remote IWF nodes (up to a maximum
of 100 per PSAX system).
End
