255-700-239
4-3
PacketStar
®
PSAX 4500 Multiservice Media Gateway User Guide
, Issue 2
Release 8.0.0
Chapter 4 Using VT100 Terminal Emulation
Connecting a Dialup Modem to the Chassis
7
Enter the appropriate values for the fields on this window according to
the information provided in Table 4-1.
End
Connecting a Dialup Modem to the Chassis
The following procedure requires the following items to dial-in to the
PSAX 4500 chassis:
•
External 9600-baud dialup modem
•
Phone line and telephone number
•
Laptop computer with a dialup modem and terminal emulator package at
the local site
•
Workstation with a dialup modem and terminal emulator package at the
remote site
To perform this operation, the chassis must be installed and operational. Per-
form the following procedure to setup and connect the PSAX 4500 chassis to
a dialup modem.
1
At the local site, place the modem near the chassis, connect the laptop to
the serial port on the modem, and connect the phone line to the phone
connection.
2
Plug the power adapter into the modem and power source.
3
Set the following parameters on the modem:
DTR on, DCD on, CTS on, 8-bit character length, 9600 baud, no parity,
and no echo.
4
Verify that the modem can be dialed into through the phone line from
the remote workstation.
5
Remove the laptop from the modem and connect the modem to the
CON-
SOLE
connector on the CPU2 module with the RJ-12-to-RJ-12 cable and
RJ-12-to-DB9 or RJ-12-to-DB25 adapter.
6
Verify that the modem can be dialed into again and the login prompt
from the chassis appears at the remote workstation.
End
Table 4-1. Windows HyperTerminal Settings
Option
Setting
Configure:
9600 baud
Data bits:
8
Parity:
None
Stop bits:
1
Flow control:
None
