Chapter 8 Configuring V5.2 European IDLC
Setting Call Control Resource Allocation Values
8-52
255-700-239
PacketStar
®
PSAX 4500 Multiservice Media Gateway User Guide
, Issue 2
Release 8.0.0
Accessing the V5 User Port Configuration Window, PSTN Port Type
Begin
Note:
If you are configuring Port type PSTN on the V5 User Port Configu-
ration window, the fields that display for configuration are differ-
ent from those that display for ISDN. Complete this procedure if
you are using a Port Type PSTN. If you are configuring Port Type
ISDN, complete the
Accessing the V5 User Port Configuration Window,
Port Type IDSN
procedure following the PSTN port type procedure.
1
From the V5 User Port Table, select the
Add User Port Configuration
Entry
command. The V5 User Port Configuration Window displays. The
command table immediately follows the window.
2
At a minimum, enter values for the fields listed below.
•
LE Port ID
•
LES Interface Port ID
•
PSTN Port CID
•
Encode Standard
•
Encoding profile Num
•
VC algorithm
•
Tone Detection Algo
•
Translate Type
3
If you want to add ports, change the Admin Status field to
Unblocked
and select the
Add V5 User Port Configuration
command.
End
Add User Port configuration
Entry
Adds the User Port configuration values of
a specific entry.
Go back to Previous Screen
Returns to the V5 Interface Variant Con-
figuration window.
Command
Function
