Lucent Technologies PacketStar PSAX 4500 User Manual Download Page 585

Page: 585 / 722

255-700-239

A-129

PacketStar

PSAX 4500 Multiservice Media Gateway User Guide

, Issue 2

Release 8.0.0

Appendix A SNMP Trap Messages

Definitions of MIB Objects Used for Trap Messages

213

dspUnsupportedForMultiCast-
Conns

DSP support is not available for multicast connec-
tions.

214

dspResourceUnavailable

DSP resources are not available for the connection
configuration given by the user.

215

destOrSrcCannotBeDSPCard

This is used for backward compatibility for old DSP
modules and this is not allowed if one of the inter-
faces is a DSP module.

216

internalDSPResourceError

An internal error indicating that the DSP interfaces
are not valid.

217

echoCancellationOnlySupported-
ForDuplex

Indicates that for echo cancellation to be supported
the connections have to be duplex.

218

cirEmCirEm-ThruPutMismatch

An indication that 2 circuit emulation interfaces with
different bandwidths cannot be connected.

219

vi-Cannot-Be-0

A virtual interface of zero already exists.

220

vi-OOR

The requested virtual interface number is out of
range for duplex connections.

221

vi-Mod-Limit-Exceeded

The number of virtual interfaces per module has
been exceeded.

222

vi-Resource-Unavail

The requested bandwidth for a virtual interface is not
available.

223

vi-Already-Exists

A virtual interface associated with that number has
already been created.

224

vi-Does-Not-Exist

A virtual interface connection no longer exists.

225

vi-0-Non-Ubr-Conn-Not-Supp

A non-UBR connection on virtual interfaces is not
supported for duplex connections.

226

vi-OS-Cannot-Be-0

The virtual interface oversubscription cannot be 0.
Must be at least 1.

227

vi-OS-OOR

The virtual interface oversubscription is not in the
range 1-10.

228

vi-CellRate-Too-Lo

The requested cell rate connection is below the avail-
able range.

229

vi-CellRate-Too-Hi

The requested virtual interface cell rate connection
exceeds the available range.

230

intf-CBR-CellRate-Exceeded

The available CBR cell rate has been exceeded.

231

intf-VBR-CellRate-Exceeded

The available VBR cell rate has been exceeded.

232

vi-Conn-CellRate-Exceeded

The requested cell rate exceeds available bandwidth.

233

vi-Not-Enabled

The virtual interface feature is not enabled for duplex
connection.

234

vi-Should-Be-0

A UBR connection has been attempted on a virtual
interface with a designation other than VI=0 for a
duplex connection.

Table A-59. PVC Failure Reason Codes (Continued)

Number

Value

Enumerated Type

Description

Summary of Contents for PacketStar PSAX 4500

















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PacketStar PSAX 4500

Reviews:

Related manuals for PacketStar PSAX 4500

Brands by name

Popular brands

Lucent Technologies PacketStar PSAX 4500, User Manual

Search results

Summary of Contents for PacketStar PSAX 4500

Reviews:

Related manuals for PacketStar PSAX 4500

Brands by name

Popular brands