Chapter 6 Configuring PNNI
PNNI System-Wide Configuration
6-2
255-700-239
PacketStar
®
PSAX 4500 Multiservice Media Gateway User Guide
, Issue 2
Release 8.0.0
you need to take the node out of service, you must first delete any
ATM PNNI interfaces you have configured on your PSAX 4500 sys-
tem.
8
Select the
Go Back to Previous Screen
command (or press Ctrl+B).
The PNNI Node Table (see Figure 6-2) is displayed, showing your current
node index, node level, and operating status. Use this screen to check a
node’s status whenever you create, delete, or bring a node into service.
9
Press Ctrl+G to go back to the Console Interface Main Menu window.
End
The commands in this window have the following functions:
Figure 6-1. PNNI System-Wide Configuration Window
Menu Option Name
Function
PNNI Node Configuration
Displays the PNNI Node Table window on
which you add a PNNI node.
PNNI Route Address Con-
figuration
Displays the PNNI Route Address Table
window on which you add a PNNI route
address.
PNNI Route TNS Configura-
tion
Displays the transit network string (TNS)
information: node index, TNS type, TNS
plan, TNS ID, and TNS index.
PNNI Summary Address
Configuration
Displays ATM NSAP addresses for all
nodes to which this link table is attached
by PNNI interfaces.