manualshive.com logo in svg

Lucent Technologies MERLIN Plus Release 2, System Manual

Introducing the Lucent Technologies MERLIN Plus Release 2, a comprehensive system designed to streamline your organization's communication needs. Access the user manual for this cutting-edge product and enhance your understanding of its features and functionalities through a free download available at manualshive.com. Optimize your business operations with ease.

Share
Download
background image

What's in This Manual

SECTION 1.
INTRODUCTION

SECTION 2.
PLANNING THE SYSTEM

SECTION 3.
ADMINISTERING THE
SYSTEM

SECTION 4.
USING THE ATTENDANT

CONSOLE

SECTION 5.
REFERENCE

SECTION 6.
ACCESSORY EQUIPMENT

SECTION 7.

TROUBLESHOOTING
THE SYSTEM

SECTION 8.
INSTALLATION

You’ll find the information in this MERLIN Plus Communications System
manual conveniently divided into eight sections, as described below.
You’ll also find ten copies of the MERLIN Plus System User’s Guide  enclosed.

This section tells you what’s in this manual and how to use it. It also offers a
brief introduction to the system’s control unit and the voice terminals
(telephones).

Use the information in this section to make some key decisions about how you
want the system to operate. This section includes planning forms to record your

decisions. If someone else will be system administrator, have that person fill out
the planning forms.

This section tells you how to use the information on the planning forms to
customize the system to meet your business needs. If someone else will be
system administrator, have that person administer the system following the steps
in this section.

If your system will have an attendant manage incoming call traffic, that person

can find helpful information in this section on using the administrator/attendant
telephone.

This section contains a detailed discussion of every component, option, and
feature in the MERLIN Plus system. The entries are organized alphabetically to
help you find the information you need quickly. As you become familiar with
the system, you’ll probably go to this section first when you want to change a
system setting or a voice terminal feature, or when you simply want to find out

more about some aspect of the system.

Accessory Equipment includes the additional hardware that can be used with the
MERLIN Plus system. The accessories are listed alphabetically.

The tables in this section can help you isolate and solve any of the technical
problems that may cause your system to malfunction.

Insert your  MERLIN Plus Release 2 Installation Manual  in this section
for future reference.

1-4   What’s in This Manual

Summary of Contents for MERLIN Plus Release 2


















































































































































































































































































































































Reviews:

No comments

Related manuals for MERLIN Plus Release 2

HandyTrac Key Control Easy Manual Installation And Operation preview
Key Control
Brand: HandyTrac Pages: 14
Harman Kardon MaestroKitchen 100 User Manual preview
MaestroKitchen 100
Brand: Harman Kardon Pages: 36
Teufel cinebase Technical Description And Operating Instructions preview
cinebase
Brand: Teufel Pages: 20
Magnavox AS 9400 Quick Manual preview
AS 9400
Brand: Magnavox Pages: 12
Taiden HCS-5300 Installation And Operating Manual preview
HCS-5300
Brand: Taiden Pages: 91
Matrix Telecom Proton 206 System Manual preview
Proton 206
Brand: Matrix Telecom Pages: 98
Korg MS-02 Owner'S Manual preview
MS-02
Brand: Korg Pages: 6
Metra Electronics 99-8239B Installation Instructions Manual preview
99-8239B
Brand: Metra Electronics Pages: 8
Yaesu SCU-LAN10 Operation Manual preview
SCU-LAN10
Brand: Yaesu Pages: 39
Mi-Light LS3 User Instruction preview
LS3
Brand: Mi-Light Pages: 5
Roger Technology B72/DGS Instruction And Warnings For The Installer preview
B72/DGS
Brand: Roger Technology Pages: 8
Kenwood KDC-3047 Instruction Manual preview
KDC-3047
Brand: Kenwood Pages: 25
Huawei 9000 VCT V100R011 Administrator'S Manual preview
9000 VCT V100R011
Brand: Huawei Pages: 204
Gigaset T300 PRO Administrator'S Manual preview
T300 PRO
Brand: Gigaset Pages: 94
GoPresence SMART 4K User Manual preview
SMART 4K
Brand: GoPresence Pages: 22
Goodmans GMN10040MP3 Instruction Manual preview
GMN10040MP3
Brand: Goodmans Pages: 12
Goodmans GMN02 User Manual preview
GMN02
Brand: Goodmans Pages: 20
John Crane API PLAN 74 STEAM Installation, Operation & Maintenance Instructions Manual preview
API PLAN 74 STEAM
Brand: John Crane Pages: 6

Brands by name

Popular brands

Load more brands