CONSIDERATIONS
An AT&T 475/476 or 572/573 printer or its equivalent is recommended to work
with the MERLIN Plus system data collector.
The MERLIN Plus system is set to have the data collector and the printer
connected to voice terminal jack 19, but the administrator can connect the data
collector and the printer to any other voice terminal jack in the system, except
NOTE:
If you are using the same printer and data collector for both the System
Feature Report and the Call Report features and change the voice
terminal jack assignment, you must administer the new jack assignment
for both features.
The data collector can hold up to one full page of printout, 60 lines of 80
characters each. The collector disregards any material over the one page limit.
For proper operation of the printer with the MERLIN Plus system data collector,
the printer options must be set correctly. The options and the method of
selecting them varies with different printers. Consult the Customer Information
Bulletin (CIB) that is provided with the data collector for the correct option
settings for your AT&T 475/476 or 572/573 printer.
ADMINISTRATION
Refer to the CIB and System Feature Report for Administration procedures.
PROGRAMMING
None
HOW TO USE
None
6-10 Accessory Equipment
Summary of Contents for MERLIN Plus Release 2
