Logicube ZXi-
10G™ User’s Manual
10
3: Quick Start
3.0 Quick Start Guide
This chapter gives a basic overview and steps on how to perform different types of operations using
the ZXi-10G (Clone, Hash, Wipe, etc.). Complete details on each operation, menu, or selection, and the
different screens can be found in
The ZXi-10G can perform up to five (5) tasks for each mode of operation (specifically Image, Hash,
and/or Wipe).
It is highly recommended to change the passwords for built-
in accounts. Instructions on how to change the passwords to
the two built-in user accounts can be found in
There are software options available such as:
-
Support for SAS (Serial Attached SCSI) drives
-
Verify functionality
To find out if these options are enabled on ZXi-10G, tap the
Statistics
icon from the navigation menu then select the
Options
tab.
For more information on these and other options, see
To purchase this option, contact the Logicube Sales Department at
3.1 Drives
This screen shows the status of all drive bays. Each drive bay will be listed whether
there is a drive connected or not.
If there is a drive connected, the model of the drive will appear in the Drive
Information column and will have a symbol in the Drive Connected column. If no
drive is detected, the bay will have a symbol.
Additional drive information can be viewed by tapping the more info icon
Drives types are listed in the following order:
•
SAS/SATA ports
•
USB ports
•
PCIe (NVMe) ports
•
Thunderbolt Ports
