TYPES OF OPERATIONS
Logicube ZXi-
10G™ User’s Manual
48
•
RANDOM
–
Writes one random hexadecimal value (from 00 - FF) to all
the selected Logical Block Addresses.
•
RAND. BUFFER
–
The unit will create an 8MB block filled with random
values (each byte in the 8MB block will contain a random value). The
8MB block will be written repeatedly to fill the entire drive.
•
VALUE
–
Instructs the unit to use the specified hexadecimal value to be
written for the pass. The values can range anywhere from 00 to FF.
•
VERIFY
–
Select
YES
to verify each wipe pass value the unit performs.
When
Verify
is set to
YES
, the
total time to wipe the drive
could double if FULL is selected.
o
PARTIAL
–
Will take pseudorandom locations on the drive and
verify the value that was written to those locations. When set,
Partial verification will be used for drives over 16GB in
capacity. If a drive used is 16GB or less in capacity, and Partial
verification is used, full verification will be used.
o
FULL
–
A full verification of the wipe process will be performed.
All values set to be written to the Target drive will be verified.
5.4.2.3 Format
Formats the Target using the NTFS, EXT4, exFAT, or FAT32 file system.
These settings are available:
•
Format
–
When set to
ON
, the Target drive will be formatted. The drive will be
formatted with the user’s choice of
file system. When set to
OFF
, the Target
drive will not be formatted.
•
File System
–
Select the file system to be used to format the Target drive.
Users can select from NTFS, EXT4, exFAT, or FAT32.
