TYPES OF OPERATIONS
Logicube ZXi-
10G™ User’s Manual
64
•
Statistics
–
Since there are no settings or configurations for this
operation, it is not affected by Config Lock.
•
Manage Repositories
–
A managed repository cannot be added, edited,
or deleted without the Config Lock unlock key.
•
System Settings
–
This entire section cannot be accessed without the
Config Lock unlock key.
•
Network Settings
–
This entire section cannot be accessed without the
Config Lock unlock key.
•
Software Updates
–
This entire section cannot be accessed without the
Config Lock unlock key.
•
Power Off
–
This entire section cannot be accessed without the Config
Lock unlock key.
The unit can still be turned off without
the unlock key by using the power
button located on the front of the unit.
5.9.2.1.2 Forgotten Password for any Keys
If any of the keys are forgotten, the INITIAL.DB profile will need to be loaded
using the Command Line Interface (CLI). See
on how to connect using the CLI.
This method will only work if the INITIAL.DB profile does
not have a Config Lock Key saved. If the INITIAL.DB has
a Config Lock Key configured, and the password was
forgotten, contact Tech Support assistance.
Once connected to the Command Line Interface (CLI):
1.
Log
in with the username “
it
” (without the quotes) and
the password
“
it
” (without the quotes).
2.
From the main prompt, type
command,
then press the enter key.
3.
Type
config
,
then press the enter key.
4.
Type
db list
, then press the enter key. This will show a list of profiles
(or databases) saved. The unit has one default profile called
initial.db
.
Any profiles added by users will appear in this list.
The example below
shows two databases (the default initial.db and lock.db). The db that
shows an asterisk (*) before the name is the current database or
configuration loaded each time the unit is turned on.
