QUICK START
Logicube ZXi-
10G™ User’s Manual
21
3.
Choose
Task Macro
from the list of operations on the left side.
4.
Tap the
Tasks
icon to select the different tasks for the macro.
5.
Tap the field next to
Operation 1
to set the first operation. Since the first task to be
run is the Wipe task, select
Wipe 1
then tap
OK
.
6.
Tap the field next to
Operation 2
to set the second operation. Since the second
task to be run is the Drive to Drive Clone task, select
Clone 1
then tap
OK
.
7.
The screen should now show
Wipe 1, Clone 1
as the Tasks for the macro.
8.
Tap the
Start
icon to begin the macro. The macro will run the Wipe 1 task first,
then Clone 1.
3.6 Logs
Audit logs of all clone, hash, and wipe operations are stored and saved on the ZXi-
10G. Logs can be viewed directly on the ZXi-10G
or from a computer’s browser (if
the ZXi-10G is connected to a network). Logs can be exported to a USB flash drive in
PDF, HTML, and XML format.
Software v2.0 adds S.M.A.R.T. data logs for drives used in any
Clone
,
Hash
, or
Wipe
operation.
Two files will be exported, “pre” and “post”, capturing S.M.A.R.T. data at the beginning of the task and
the end of the task. S.M.A.R.T. logs are located in the smartlogs subfolder and can be retrieved by
following the instructions in
Details for the Logs
screen can be found
in
3.6.1 Step-By-Step Instructions
–
Viewing or Exporting Logs
To view the audit log files:
