TYPES OF OPERATIONS
Logicube ZXi-
10G™ User’s Manual
60
7.
The ZXi-10G
will attempt to connect to the iSCSI target. If successful, a “connected”
screen will appear. Tap
OK
to continue.
Multiple iSCSI connections can be added. To
disconnect an iSCSI connection, highlight the
portal to disconnect, then tap
Disconnect
. To edit
or delete an iSCSI connection, tap
Edit
or
Delete
.
5.9 System Settings
System Settings
screen allows users to configure several different settings which
include:
Profiles
,
Passwords
,
Language/Time Zone
,
Bay Roles
.
5.9.1 Profiles
Do not highlight and save over the INITIAL.DB
profile. This is the default profile of the unit and is
used to reset the unit to the factory default settings.
This screen shows all user profiles. The following selections are available on this screen:
•
New
–
Allows the user to create a new profile name.
•
Save
–
Saves the selected profile.
•
Load
–
Loads the selected profile.
•
Clear
–
Clears the selected profile of all saved settings and resets the profile to
contain default settings. After clearing the selected profile, the profile will need to be
saved to save any changes.
With software version 2.0 and newer, settings and selections are
now persistent through a reboot/power-off sequence. When the ZXi-
10G is turned on, it will load all the previous settings and selections.
