Logicube ZXi-10G User Manual Download

Page: 79 / 110

TYPES OF OPERATIONS

Logicube ZXi-

10G™ User’s Manual

5.10.4 HTTPS

HTTPS certificates are required for secure remote access. On this tab, users can view, select,
upload, or generate HTTPS certificates.

5.11 Software Updates

New and improved software will be released from time to time. There are two ways
to update the software: From the web through a network connection or from a USB
drive.

For the latest step-by-step instructions on how to update the software, please
read the

ZXi-10G Software readme

file

located on the ZXi-10G Support page on

the Logicube website at

https://www.logicube.com/knowledgebase/zxi-10g

In-depth information on updating the ZXi-10G software can be found in

Chapter

6: Updating/Loading/Re-loading Software

The

PXEBOOT Update

tab is reserved for
future use.

5.12 Power Off

The following tabs are available in the

Power Off

screen:

POWER OFF

–

The unit can be remotely restarted or turned off by going to this tab. Additionally, the

Graphical User Interface (GUI) can be refreshed.
DRIVE POWER

–

Connected, inactive drives can be set to go to standby mode in this tab. The default is

set to 0 minutes (Off/Disabled).

Summary of Contents for ZXi-10G















































































































Search results

Summary of Contents for ZXi-10G

Reviews:

Related manuals for ZXi-10G

Brands by name

Popular brands

Logicube ZXi-10G, User Manual

Search results

Summary of Contents for ZXi-10G

Reviews:

Related manuals for ZXi-10G

Brands by name

Popular brands