TYPES OF OPERATIONS
Logicube ZXi-
10G™ User’s Manual
61
The asterisk (*) next to the profile name is the currently loaded profile.
After loading a profile, it is recommended to refresh the User
Interface. This can be done one of several ways:
- From the touch screen, go to the POWER OFF menu and tap the
Refresh
button.
- If a web browser is used for remote operation, press the F5 key on
the computer’s keyboard or locate the
Refresh
icon on the browser.
The Profiles tab allows users to create, save, and load different profiles with different
configurations. When a profile is loaded using the
Load
icon, the unit will load that profile
during its boot process.
For example, if the user wants the unit to always boot up with the default Clone mode of
Image
to Drive
:
1.
Turn the unit off then back on. This will reset all settings to the loaded profile. This is
an important step to help ensure only the changes desired will be the changes saved.
2.
Go to the
Clone
screen and set the
Mode
to ‘Image to Drive’.
3.
In the
System Settings
, go to
Profiles
and tap the
New
icon.
4.
Type a name for this profile. For example, ImageToDrive and tap the
OK
icon. The
profile name should appear on the screen.
5.
Tap the newly saved profile and tap
Save
. A confirmation screen will appear.
6.
Tap the
Yes
icon to save the profile.
7.
Make sure the profile to be loaded (during the boot process) is highlighted (for
example ImageToDrive.DB) and tap the
Load
icon. A confirmation screen will appear.
8.
The next time the unit is turned on it will load ImageToDrive profile.
To delete a profile, highlight the profile to be deleted then tap the delete icon. A confirmation
screen will appear. Tap the
Yes
icon to delete the selected profile.
When loading a profile, it may take
several seconds to completely load
the different profile.
5.9.2 Passwords
There are seven keys or passwords that can be set or changed.
•
Key: Log File Deletion
–
A key can be set as an extra layer of protection when deleting
log files. If this key is set, a key prompt will appear, and the correct key must be
entered before any log files can be deleted.
•
Key: Local HTTP
–
A key can be set to lock the local touch screen on the unit. If this
key is set, a key prompt will appear, and the correct key must be entered before
allowing access to the local touch screen.
