Logicube ZXi-
10G™ User’s Manual
87
8: Options
8.0 Hardware and Software Options - Introduction
The ZXi-10G has several available additional options including software options and additional
adapters. For a complete list of available options, please visit
https://www.logicube.com/shop/zxi-
. This section lists the following options:
•
4-Port Drive Expansion Kit
•
PCIe Expansion Module (for M.2 NVMe SSDs)
•
Hash Verification Option
•
SAS Option
To purchase one or more of these options, please contact Logicube Sales at
8.1 4-Port Drive Expansion Kit
The optional expansion kit provides an additional 2 SAS/SATA and 2 SATA only targets.
If the SAS option is installed and the Drive Expansions are installed, bays T6 and T7 will be able to
detect and use SAS drives.
If the SAS option is
not
installed and the Drive Expansions are installed, bays T6 and T7 will only be
able to detect other supported drives except for SAS drives.
8.1.1 Attaching the Removable ZXi-10G Drive Station
Follow these steps to attach the removable ZXi-10G drive stations to the ZXi-10G
’s expansion
slots:
1.
Remove the cover on one of the expansion ports (T6 through T9) using a Phillips head
screwdriver. There are two screws on the cover (one on each side). Set the two screws
aside as they will be used for the ZXi-10G drive station.
2.
Connect the ZXi-10G drive station to the open port from step 1. When inserted
properly, the ZXi-10G drive station should not be protruding or sticking out.
3.
Use the two screws set aside from step 1 to tighten and set the ZXi-10G drive station
in place.
