TYPES OF OPERATIONS
Logicube ZXi-
10G™ User’s Manual
63
Tap the
Enable
icon to enter a password or key. The available characters are 0 through
9 and A through F.
The
Auto Lock
button is available for the following keys:
•
Local HTTP
•
Remote HTTP
•
Config Lock
Tap the
Auto Lock
icon to set the time to automatically lock the configuration and
require a password. By default, this is set to 1 minute.
Remember the Config Lock Key! If the unit is configured to
load a user profile with the Config Lock set to enabled and
the password is forgotten, the only way to reset the Config
Lock is to load the INITIAL.DB profile using the Command
Line Interface. See
If the INITIAL.DB has a Config Lock Key configured, and the
password was forgotten, contact Tech Support assistance.
5.9.2.1.1 Config Lock Notes
A shortcut (and indicator) to the
config lock
can always be seen on the top-
right of the screen next to the logo.
or
While in a locked state, the following operations will be affected as follows:
•
Drives
–
Since there are no settings for this screen, it is not affected by
the Config Lock.
•
Clone
–
A clone task can be started, but no settings can be changed.
Additionally, no new task can be added, and no task can be deleted
without the Config Lock unlock key.
•
Hash
–
A hash task can be started, but no settings can be changed.
Additionally, no new task can be added, and no task can be deleted
without the Config Lock unlock key.
•
Wipe / Format
–
A wipe/format task can be started, but no settings
can be changed. Additionally, no new task can be added, and no task
can be deleted without the Config Lock unlock key.
•
Task Macro
–
A task macro can be started, but no settings can be
changed. Additionally, no new macro can be set or edited without the
Config Lock unlock key.
•
Logs
–
Logs are not affected by Config Lock.
