USB BOOT CLIENT
Logicube ZXi-
10G™ User’s Manual
96
3.
Connect the computer (with the USB Boot Client) to the same network the ZXi-10G is
connected to.
4.
Boot the computer with the USB Boot Client.
Please contact the computer manufacturer if you do not
know how to change the boot sequence to boot from a USB
drive or to find out if the computer supports this function.
5.
The USB Boot Client’s boot menu will appear, and It should auto
-
select “iSCSI Targe
t (64-
bit)” after a few seconds. If not, select “iSCSI Target (64
-
bit)”.
The default (64-bit) should work with most computers. If it
does not work, use the connected keyboard’s DOWN arrow to
select iSCSI Target (32-bit) to boot with the 32-bit version.
6.
After about 30-120 seconds (depending on the speed of the computer), the USB Boot Client
should finish booting up.
•
The following screen may appear if no network adapter or network connection is
detected, or briefly while the network is being detected. If this screen appears for a
long time, double-check the network adapter or network connection.
•
If a network adapter and network connection are detected, the following screen will
appear:
