CLONING
Logicube ZXi-
10G™ User’s Manual
34
4.3.4 Hash/Verification Method
The Hash/Verification method screen is available in all modes. Hash is not available in
Image
to Drive
but is available in other modes. Verification is available in all modes.
The Hash Method selection is shown in
Image to Drive
but is not
selectable. The unit will automatically use the hash method that
was selected when the image was created (using Drive to Image).
Hash
–
Will hash the Master drive with the selected method. There are different hash algorithm
options available, depending on which Imaging mode is selected:
•
None
–
No hash of the Master will be performed. This is available only when using the
following mode:
o
Drive to Drive
•
SHA-1
–
Uses the SHA-1 algorithm to hash the Master. This is available when using the
following modes:
o
Drive to Drive
o
Drive to Image
•
SHA-256
–
Uses the SHA-256 algorithm to hash the Master. This is available when
using the following modes:
o
Drive to Drive
o
Drive to Image
•
MD5
–
Uses the MD5 algorithm to hash the Master. This is available when using the
following mode:
o
Drive to Drive
Verification Method/Verify
–
Available selections are YES or NO. Select
YES
to hash the Target
and verify that hash with the hash calculated from the Master during the cloning process.
The Verify feature is an option. To verify if this option is
installed, press the
Statistics
icon from the navigation menu
on the left and select the
Options
tab. To purchase the SAS
option, contact our sales team at
4.3.5 File Image Method Settings
The File Image Method Settings screen allows the user to select a file image output mode. The
output modes available are:
•
Mirror
–
Creates a bit-for-bit image of the Master.
•
Clever
–
Copies only sectors containing data and compresses the image file.
