Logicube ZXi-
10G™ User’s Manual
38
5: Types of Operations
5.0 Types of Operations
There are twelve (12) types of operation available. The left side of the screen shows the different
operation types that can be set. Detailed information on all the different operations and their screens
can be found in this section.
1.
–
This screen shows the status of all drive bays. Each drive bay will be listed and will
show any drive connected.
2.
–
There are three cloning modes available. Drives can be cloned using
Mirror
(bit-for-
bit copy) or
Clever
(copies only data areas, skips blank sectors, and partitions can be resized).
•
Drive to Drive
–
Performs a bit-for-bit copy of the Master producing an exact duplicate
of the Master drive.
•
Image to Drive
–
Restores an image created by the ZXi-10G to one or more Target
drives.
•
Drive to Image
–
Creates a Logicube ZXi-10G image file to a Target or Repository. This
image file can be restored to drives using the Image to Drive mode.
Details on the different screens found in the Imaging operation can be found in
