TYPES OF OPERATIONS
Logicube ZXi-
10G™ User’s Manual
40
•
Passwords
–
Allows the user to set passwords to lock the unit from any access or
configuration changes.
•
Language/Time Zone
–
Sets the language on the on-screen menu and allows the
change of
the system’s Time Zone.
•
Bay Roles
–
This allows the user to configure each bay to be a Master, Target, or both
Master and Target.
10.
–
Allows the editing of various network configurations. The following
tabs are available:
•
Interfaces
–
Edit TCP/IP and enable or disable certain network services.
•
HTTP Proxy
–
Set proxy settings (if required by the user’s network).
•
Network Configurations - Change the ZXi-
10G’s hostname or NTP servers.
•
HTTPS
–
View, select, upload, or generate HTTPS certificates for secure remote
access.
11.
–
Perform software and firmware updates on the unit. The software can
be updated over an internet connection (from network) or from a USB flash drive. Two tabs
are available:
•
Software Updates
–
This is the screen where users can check for new software and
update or reload the software.
•
Firmware Update
–
Firmware for the unit (if available) can be updated on this screen.
•
PXEboot Update
–
This is reserved for future use.
12.
–
Turn the unit off, restart the unit or refresh the Graphical User Interface (GUI)
and set a drive timeout, powering down drives when not in use. The following tabs are
available:
•
Power Off
–
The unit can be restarted or turned off on this screen. This can be useful
when using the web interface. The User Interface can also be refreshed on this screen.
•
Drive Power
–
Drives can be powered down automatically when not in use.
5.1 Drives
This screen shows the status of all drive bays. Each drive bay will be listed whether
there is a drive connected or not.
If there is a drive connected, the model of the drive will appear in the Drive
Information column and will have a symbol in the Drive Connected column. If no
drive is detected, the bay will have a symbol.
Additional drive information can be viewed by tapping the
more info
icon.
