TYPES OF OPERATIONS
Logicube ZXi-
10G™ User’s Manual
65
5.
Type
db
load initial.db
then press the Enter key to load the default
database. There should be a response showing “Command
(DbManagement) Successful”.
6.
Type
db list
again and there should be an asterisk (*) on initial.db.
7.
Turn the unit off using the power button, then close the Telnet/SSH
application.
8.
Turn the unit on. When the unit boots up, it will load the default
configuration (INITIAL.DB).
5.9.2.2 User Account Passwords
This unit comes with the following built-in user accounts:
•
logicube
•
it
•
iscsi
All user account passwords can be changed on this screen. To change the password
for either account, tap either the
LOGICUBE
,
IT
, or
iSCSI
button. A screen will appear:
1.
Enter the current password.
The default password for each account is:
LOGICUBE: logicube
IT: it
ISCSI: logicube@19755
2.
Enter a new password.
3.
Enter the new password again in the
confirm password
box.
4.
Tap the
OK
icon when finished.
The
User Account Passwords
do not need to be saved
into a user profile. Changing any of these two passwords
will take effect immediately. If the User Account
password is forgotten, contact Tech Support assistance.
