Linksys LRT214 User Manual Download Page 74 | Manualshive

Page: 74 / 77

background image

70

Maintenance

Linksys

70

Maintenance

Diagnostic

The device provides a simple online network diagnostic tool to help users
troubleshoot network-related problems. Go to Maintenance > Diagnostic.

The features include DNS Lookup (Domain Name Inquiry Test) and Ping (Packet
Delivery/Reception Test).

DNS Name Lookup

Choose this option to test connectivity to the DNS server that you specified on
the Configuration > Setup > Network page, or to look up an IP address that you
want to use in the ping test.

Enter a host name – example: www.linksys.com (Do not include a prefix such as
http://) - and click Go. You will see the IP address of the host.

NOTE:

This feature requires that the router can connect to a valid DNS server. Please
check if your WAN interface can be linked to the Internet.

Ping

This feature informs users of the status quo of the outbound session and allows
users to know if computers are online or not.

On this screen, please enter the host IP that users want to test such as
192.168.5.20. Press Go to start the test. The result will be displayed on this
screen.

Factory Default

Use the Maintenance > Factory Default page to restore the router to its factory
default settings.

1.

Click Factory Default if you want to restore the router to its factory default
settings except OpenVPN configuration. When the confirmation message
appears, click OK to continue or click Cancel to abandon.

2.

Click Factory Default including OpenVPN if you also want to restore
OpenVPN configuration. When the confirmation message appears, click
OK to continue or click Cancel to abandon.

«
...
72
73
74
75
76
...
»

Summary of Contents for LRT214














































































Reviews:

No comments

Related manuals for LRT214

Brand: Panasonic Pages: 44

Brand: Garmin Pages: 2

Brand: Hawking Pages: 2

HiGain HLU-231 List 8F

Brand: ADC Pages: 7

Brand: Campbell Pages: 38

Brand: TP-Link Pages: 2

Brand: ADTRAN Pages: 2

Elinx EIR508 Series

Brand: B&B Electronics Pages: 2

Brand: Symantec Pages: 100

Brand: Xantech Pages: 16

Brand: Edimax Pages: 15

Air Live GW-300R

Brand: Ovislink Pages: 20

EZ Switch SMC-EZ1024FDT

Brand: SMC Networks Pages: 4

Airborne M2M ABDN-er-DP55 Series

Brand: B+B SmartWorx Pages: 120

Brand: Digisol Pages: 73

Brand: Patton electronics Pages: 8

Brand: ADC Pages: 29

Brand: Alloy Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands