19
Setup
Linksys
Service
Select the service. You can also add a new service
from Service Management.
Name or IP Address
Input the Intranet virtual IP address or host name.
Enable
Activate this function.
Service Management
Add or remove service ports from the
management list.
Add to List
Click the button to add a new entry.
Update
Select the entry that you want to modify. Change
the setting and click Update. Clicking Add New
deselects the entry and clears the text fields.
Delete
Click the entry and then click Delete.
View
To view the entry table, click Refresh to update the
display. Click Close to return to configuring page.
Adding a service
To add a new service item or to edit an existing service, click
Service
Management.
If the web browser displays a warning about the pop-up
window, click to allow the blocked content.
In the Service Management window, add or edit entries as needed. After
setting a rule, be sure to click OK to save your settings or click Cancel to undo
them.
To add a service to the list: Enter
•
Service Name:
Give a name to the service.
•
Protocol:
Choose the required protocol: TCP, UDP or IPv6.
•
Port Range:
Enter the port range.
•
To add another new service:
enter the information, and click Add to list.
•
To edit a service you created:
, select the service in the list and click
Update to make the changes. If you do not need to make changes, click
Add New to deselect the service and clear the text fields.
•
To delete a service from the list, click Delete.
One-to-One NAT
If your ISP issued more than one actual IP (such as eight ADSL static IP
addresses or more), you can map the remaining real IP addresses to the
intranet devices with virtual IP addresses.
You can also map a private IP address range to a public IP address range of
equal length (for example, five private addresses and five public addresses).
The first virtual address will be mapped to the first external address.
Use the Configuration > Setup > One-to-One NAT page to enable One-to-One
NAT (Network Address Translation).
NOTE
Remember to click
Save
to save your settings before leaving the page.
You can also click
Cancel
to leave without any change.
Summary of Contents for LRT214
Page 1: ...LRT214 LRT224 User Guide ...
Page 33: ...29 DHCP Linksys ...
