Linksys LRT214 User Manual Download Page 66 | Manualshive

Page: 66 / 77

background image

62

OpenVPN

Linksys

62

OpenVPN

Summary

The router supports up to five OpenVPN tunnels. OpenVPN is a SSL/TLS-based
technique to create secure point-to-point tunnel connection.

Go to Configuration > OpenVPN > Summary to check summary page.

OpenVPN Server Status

Enable:

Indicates OpenVPN server is enabled or disabled.
Go to OpenVPN Server setting page to change the
configuration.

Valid Duration:

The duration in which the certificate is valid. For an
example, from2013-06-01 to 2014-06-01.

Authentication
Type:

Password, Certificate or PCertificate.

Protocol:

TCP or UDP. For example, TCP443 or UDP1194.

Encryption:

Encryption mode.

Security Subnet: The subnet to which OpenVPN client can connect.
Config.:

Click the Edit icon to get into OpenVPN Server setting page.

OpenVPN Client Status

You can use the Rows per page list at the top right corner of the table to decide
the number of rules to display on each page and use the Page list to choose a
particular page.

Enable:

Indicates the specified OpenVPN client is enabled
or disabled. Go to OpenVPN Client setting page to
change the configuration.

Valid Duration:

The duration in which the certificate is valid. For an
example, From: 2013-06-01 To: 2014-06-01.

Name:

The client’s name.

Remote IP Address: WAN IP address of the router.
Virtual IP Address:

The virtual IP address assigned to the OpenVPN
client.

Status:

Current OpenVPN clients. Disconnect button will
appear when client connects to server. Pushing the
button disconnects the tunnel.

Export:

Click the OpenVPN logo to export client
configuration. Client users can import this .ovpn file
to their mobile device or PCs to create an OpenVPN
tunnel to the router. You also can click the email icon
to send the .ovpn file to an external email address,
and avoid the export step.

Config.:

Click the Edit icon to get into OpenVPN Client setting
page. You can also click the trash can icon to delete
the client configuration.

You can also click Add button under the OpenVPN client table to configure a
new OpenVPN client.

OpenVPN Server

This page will introduce how to configure OpenVPN server. Check the box to
enable OpenVPN server or uncheck to disable.

«
...
64
65
66
67
68
...
»

Summary of Contents for LRT214














































































Reviews:

No comments

Related manuals for LRT214

Brand: H3C Pages: 34

3C13886 - Router OC-3 ATM SML Flexible Interface...

Brand: 3Com Pages: 171

OfficeConnect WX2200

Brand: 3Com Pages: 204

Brand: Lancom Pages: 25

Brand: Allied Telesis Pages: 1

APS6-400 Series

Brand: Eaton Pages: 114

Bolide BN-NVR/NX

Brand: GSA Pages: 101

Brand: WatchNet Pages: 2

Brand: Lancom Pages: 79

Brand: Planet Pages: 67

Brand: Exibel Pages: 2

593/25, 593/45, 593/TB, RS-422, RS-485

Brand: Patton electronics Pages: 8

Brand: NetApp Pages: 10

WP-N6516-M2-16P

Brand: Wisstar Pages: 195

Brand: Royal Pages: 6

Brand: Nokia Pages: 67

Brand: Nokia Pages: 10

Brand: MikroTik Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands