31
System Management
Linksys
Protocol Binding (Only Dual-WAN Mode supports this
function)
Users can define specific IP addresses or specific application service ports
to go through a user-assigned WAN for external connections . For any other
unassigned IP addresses and services, WAN load balancing will still be carried
out .
NOTE:
In the load balance mode of Assigned Routing, the first WAN (WAN1) cannot
be assigned . It is to be saved for the IP addresses and the application Service
Ports that are not assigned to WAN2 for external connections . In other words,
the first WAN (WAN1) cannot be configured with the Protocol Binding rule .
This is to avoid a condition where all WANs are assigned to specific Intranet IP
or Service Ports and destination IP, resulting in no more WAN ports available
for other IP addresses and Service Ports .
Enable Network
Service Detection:
Click to enable Network Service Detection .
Retry count:
Input the retry times for network service
detection . If there is no feedback from the Internet
in the configured retry times, the router will rule
“External Connection Disconnected .” The default
is five retry times .
Retry Timeout:
The default is 30 seconds . After the retry timeout,
external service detection will restart .
When Fail:
(1) Prohibit WAN2 from handling traffic for WAN1
when WAN1 connection fails .
(2) Allow WAN2 to accept traffic from WAN2
when WAN1 connection fails .
Detecting Feedback Servers:
Default Gateway:
If you check the box, the router will ping the default
gateway of your ISP to check network connectivity .
ISP Host:
Router will attempt to ping the specified ISP
address to determine whether network service is
available .
Remote Host:
Router will attempt to ping the specified IP
address and determine whether network service
is available .
DNS Lookup Host:
Router will attempt to ping the specified host/
domain name to determine whether network
service is available .
If you check multiple boxes, the router will detect internet connectivity if a ping
to any of the IP addresses is successful . If the router can ping none of them, it
will declare that the internet connectivity associated with the given WAN port
is not available . This will trigger the router to redirect all traffic to the WAN port
that has internet connectivity according to NSD .
Summary of Contents for LRT214
Page 1: ...LRT214 LRT224 User Guide ...
Page 33: ...29 DHCP Linksys ...
