35
System Management
Linksys
When a single IP exceeds session,
block this IP’s new session for
__ minutes or block this IP’s all
session for __ minutes :
block this IP’s new session for __
minutes:
Users exceeding session number will
not be able to make a new session
until the configured time ends .
block this IP’s all session for __
minutes:
All sessions of users who exceeded
session number will be removed .
New connection cannot be made
until the configured time ends .
Scheduling
•
Time:
o
Always If the rule applies at all times .
o
Interval Specify the time period when the rule is active . If you choose this
option, you must enter a time period in the From and To fields . Optionally, you
can specify the days of the week .
•
From and To Enter the start time in the From field and enter end time in
the To field . Use hh:mm format, such as 15:30 for 3:30 p .m . Enter 00:00 to 00:00
if the rule applies during all times of day .
•
Effective on If you chose Interval, use the check boxes to specify the
active days of the rule . Check the Everyday box if the rule is active on all days .
To choose specific days, uncheck the Everyday box and check the box for each
day when the rule is active .
SNMP
Go to Configuration > System Management > SNMP page to set up SNMP
(Simple Network Management Protocol) . SNMP refers to network management
communications protocol, and it is also an important network management
item . Through SNMP communications protocol, programs with network
management, such as SNMP browser, can help communications of real-time
management . The device supports standard SNMP v1/v2c and is consistent
with SNMP network management software
NOTE:
Remember to click Save before leaving the page . You can also click Cancel to
undo the changes .
Summary of Contents for LRT214
Page 1: ...LRT214 LRT224 User Guide ...
Page 33: ...29 DHCP Linksys ...
