16
Setup
Linksys
NOTE:
Remember to click Save before leaving the page. You can also click Cancel
to undo the changes.
Port Forwarding and Port Triggering
You can set up a port forwarding virtual host to allow public access to servers
connected to the LAN ports. Port Forwarding opens a specified port or a port
range for a service, such as FTP, WWW, and mail, etc. Port Triggering opens a
port range for services that use alternate ports to communicate between the
server and LAN host. Use the Configuration > Setup > Forwarding page to
configure.
•
Port Range Forwarding
•
Port Triggering
NOTE
Remember to click
Save
before leaving the page. You can also click
Cancel
to undo the changes.
Port Range Forwarding
Port forwarding can be used to set up public services on your network. When
users from the Internet make certain requests to your network, the router
can forward those requests to computers that are equipped to handle the
requests. If, for example, you set the port number 80 (HTTP) to be forwarded
to IP address 192.168.1.2, then all HTTP requests from outside users will be
forwarded to 192.168.1.2.
To set up other services input the server TCP or UDP port number and the
virtual host IP addresses.
Service
Select the service. You can also add a new service from
Service Management.
IP Address
Input the LAN IP address of the virtual host.
Interface
Select the WAN port. (Dual WAN router only)
Add to list
Click the button to add a new entry.
Update
Select the entry that you want to modify. Change the setting
and then click Update. Clicking Add New deselects the entry
and clears the text fields.
Delete
Click the entry and then click Delete.
View
To view the entry table, choose Port Range Forwarding or
Port Triggering.Click Refresh to renew the display. Click Close
to return to configuring page.
Summary of Contents for LRT214
Page 1: ...LRT214 LRT224 User Guide ...
Page 33: ...29 DHCP Linksys ...
