manualshive.com logo in svg

Lightware UBEX Series, User Manual, Page: 51 / 201

Share
Download
Lightware UBEX Series User Manual Download Page 51

 

4. UBEX Concept 

UBEX series – Matrix Application Mode – User's Manual 

51

 

4. UBEX Concept 

UBEX series – Matrix Application Mode – User's Manual 

51

MA

TRIX  APPLIC

A

TION  MODE

Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2

Layout with Six Zones

The next layout example contains six zones which displays six different source streams. It has a 3x3, a 3x1, 

and four standalone zones with one display device per zone.

4.4.3. Identifying of the Display/Zone

The UBEX video wall system has a feature to help identifying a display device or a zone physically. When you 

need to see quickly which display or zone you want to configure actually, this feature makes generating 10 

test colors on the display device(s) for 10 seconds.

Example for Identifying a Display

Example for Identifying a Zone

The Identify display/zone feature is available:

 

▪

in the 

Lightware Device Controller (LDC)

 software - see the details in the 

Managing of the Layout and 

Zones

 section.

 

▪

with 

LW3 protocol commands

 - see the details in the 

Identify the Zone

 section.

4.4.4. Software Control Modes of the Video Wall

Video walls can be defined and supervised by two software control method:

 

▪

Lightware Device Controller (LDC)

 / 

Built-in Website

 - see the details in the 

Video Wall Setup 

section.

Crosspoint view of the LDC with video wall

 

▪

LW3 protocol commands

 - see the details in the 

Video Wall Configuration

 section.

 

 

Summary of Contents for UBEX Series










































































































































































































Reviews:

No comments