manualshive.com logo in svg

Lightware UBEX Series, User Manual, Page: 188 / 201

Share
Download
Lightware UBEX Series User Manual Download Page 188

 

14. Appendix 

UBEX series – Matrix Application Mode – User's Manual 

188

 

14. Appendix 

UBEX series – Matrix Application Mode – User's Manual 

188

MA

TRIX  APPLIC

A

TION  MODE

Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2

14.5. Release Notes of the Firmware Packages

14.5.1. Endpoint Series

Valid for the following models:

 

▪

UBEX-PRO20-HDMI-F100

 

▪

UBEX-PRO20-HDMI-F110

 

▪

UBEX-PRO20-HDMI-R100 series

v1.4.1b2

Release date: 2019-12-03

Bugfix:

 

▪ Fixed a glitch with input scaler configuration storage

 

▪

Optimized runtime memory usage

v1.4.0b4

Release date: 2019-11-27

New feature:

 

▪

Added check to refuse downgrading to earlier versions

Bugfix:

 

▪

Added file system in order to cope with bad NAND flash blocks

 

▪

Improved stability for multicast update

v1.3.2b2

Release date: 2019-08-14

New feature:

 

▪

Fixed issues with using the 10.0.0.0/8 IP range for control

v1.3.1b5

Release date: 2019-07-02

New feature:

 

▪

Added support for No Sync Screen generation on TX/TRX sources 

(for network diagnostics)

 

▪

Added support for LDC Orientation Preference setting

 

▪

Improved LLDP support (reporting operation mode and package 

version)

 

▪

Added identify() method to S and O nodes

 

▪

Fixed channel status data for analog audio inputs

 

▪

Refined fan control (silent operation)

v1.1.1b1

Release date: 2018-08-30

Bugfix:

 

▪

More robust SCDC handling is introduced.

v1.1.0b6

Release date: 2018-06-25

New feature:

 

▪

Source locked mode is now supported.

 

▪

Scaling and frame rate conversion are also supported on 

transmitter side.

 

▪

The frame rate converter and scaler modules support image 

cropping in case of downscaling in center image position.

 

▪

12-bit deep color HDMI signals can be transmitted in 10 bit mode.

Bugfix:

 

▪

4K60 4:4:4 and 4K30 4:4:4 signals can be passed through at the 

same time.

 

▪

SCDC  registers  are  only  modified,  if  the  connected  display 

supports this protocol.

v1.0.1b4

Release date: 2018-05-14

14.5.2. Matrix Management Unit (MMU)

Valid for the following model:

 

▪

UBEX-MMU-X200

v1.2.1b1

Release date: 2019-12-04

Bugfix:

 

▪

Added new version of Endpoint's firmware (v1.4.1b2)

Endpoint (v1.4.1b2)

Bugfix:

 

▪ Fixed a glitch with input scaler configuration storage

 

▪

Optimized runtime memory usage

 

▪

Added support for R100 part numbers

 

▪

Added support for IR in F110

 

▪

Added support for centralized firmware update

Bugfix:

 

▪

Fixed a glitch with some 10G switches not switching streams 

automatically

Known issue:

 

▪

Video output is unstable when scaling a pre-cropped image to 

4K@60

v1.3.0b10

Release date: 2019-05-03

New feature:

 

▪

Added support for Transceiver mode

 

▪

Added support for scaling to the default resolution of the 

attached display (EDID-based scaling)

 

▪

Added support for F110 variant (analog audio in/out, RS-232)

 

▪

Added support for upgrading endpoints in matrix mode with 

LDU2

Bugfix:

 

▪

Signal properties are reported on unconnected outputs as well

 

▪

All  RX/TX  mode  related  settings  are  cleared  when  operation 

mode is changed

 

▪

Fixed issues with fan control

 

▪

Added support for LW3 configuration backup and restore

 

▪

Fixed issue with color space conversion for DVI inputs

 

▪

Fixed a glitch with updating dynamic EDIDs

 

▪

Improved stability of the embedded bootloader

v1.2.0b1

Release date: 2018-10-05

Bugfix:

 

▪

Fixed issue with detecting HDMI 1.x sources after receiving 

4K@60 Hz

 

▪

Fixed 4K@30 Hz transmission over a single 10G link

 

▪

Fixed image artifacts with a few scaling configurations

 

 

Summary of Contents for UBEX Series










































































































































































































Reviews:

No comments