3. Installation
UBEX series – Matrix Application Mode – User's Manual
33
3. Installation
UBEX series – Matrix Application Mode – User's Manual
33
MA
TRIX APPLIC
A
TION MODE
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
3.4.7. Matrix Management Unit (MMU)
Connections for the UBEX-MMU-X200 Matrix Management Unit
OPT / DAC
Ethernet
Two possibilities are available to connect the MMU to
the Layer 3 (L3) network switch:
▪
via Ethernet:
use the CATx port of the UBEX
Network for the Ethernet connection between
the devices, OR
▪
via SFP port:
–
use a singlemode or multimode (depends
on the installed SFP
(not SFP+)
modules)
fiber optical cables or DAC cables between
the MMU and the Layer 3 (L3) network
switch.
–
use CATx cable between the MMU and the
Layer 3 (L3) network switch when RJ45
SFP
(not SFP+)
module is installed to the
slot.
Ethernet
Connect a controller device (e.g. laptop) to the MMU
with a CATx cable for the connection to the LAN
network.
RS-232
Optionally connect third-party controller devices (e.g.
system controller, touch controller) with a serial cable
via the RS-232 1 and 2 connectors.
Power
Connect the power adaptor to the AC input on the MMU
first, then to the AC power socket.
